Tactical Recovery Equipment is designed to improve safety and performance when off the paved road. We have specifically designed our products to enhance your off road vehicle recovery. TRE was founded by off road enthusiasts who knew there was an easier and safer way to get the job of vehicle recovery done in an efficient amount of time. TRE products are lightweight, easy to use and safer than most recovery products already on the market.
With recovery adapting to modern technology, we made sure to have the best synthetic rope products available. Our Synthetic Winch Ropes have a pulling capacity of one and a half times stronger than cable. Our soft shackles are made out of the same high strength synthetic rope as the winch rope and are considered a high performance replacement for the steel shackles. TRE’s Kinetic Recovery Rope has a pulling capacity of 32,000 pounds and provide superior performance, strength and durability compared to conventional Tow Ropes.
Products such as the “Original” Winch Safety Thimble, the Safety Thimble Fairlead, TRE’s under two pound Snatch Block, and the innovative license plate bracket, are designed to improve your off road experience. Our recovery equipment products are precision CNC machined from 6061 aircraft grade aluminum and are anodized black using a two step Electrolytic process to help reduce fading.
TRE is offering a bundle package consisting of an “Original” Safety Thimble 2 along with 85′ of 3/8″ synthetic orange winch rope and all the hardware needed for installation including a new and improved drum attachment. Made in The USA.
Orange Winch Rope
The winch rope is a 3/8″ diameter synthetic orange winch rope with a certified breaking strength of 18,500lbs. Included on the synthetic rope is a newly designed drum attachment that reduces abrasion on the winch line under load.
The Original Safety Thimble 2 is a must needed item for safer recovery operations. It is made of 6061 Aluminum specially designed to protect you and your equipment. The Thimble is 100% made in the USA The thimble fits securely against your hawse fairlead and prevents scratches in the fairlead which damages synthetic winch ropes. The Safety Thimble 2 is anodized black with a 2 step Electrolytic process to help resist fading.
Winch Rope with Safety Thimble includes:
Safety Thimble 2
85ft of 3/8″ orange synthetic winch rope (18,500lb breaking strength)
Drum Attachment and all hardware needed for installation
The synthetic rope, safety thimble, and winch attachment come fully assembled. All you will need to do is install the rope on your winch d
We have synthetic winch rope available in many colors, check out all our different colors in Synthetic Winch Rope
Winch Rope with Safety Thimble and Fairlead Package
What better way to update or replace your winch recovery needs on your Jeep or off road vehicle and save money at the same time with the Winch Rope with Safety Thimble and Fairlead Package. TRE is offering a bundle package consisting of an “Original” Safety Thimble 2 along with 85′ of synthetic winch rope, a TRE designed and manufactured standard fairlead, and all the hardware you need to complete installation including a newly designed winch drum attachment.
The Original Safety Thimble 2 is a must needed item for safer recovery operations. It is made of 6061 Aluminum specially designed to protect you and your equipment. The Thimble is 100% made in the USA The thimble fits securely against your fairlead and prevents scratches in the fairlead which damages synthetic ropes. The Safety Thimble 2 is anodized black with a 2 step Electrolytic process to help resist fading.
Synthetic Winch Rope
The winch rope is a 3/8″ diameter synthetic rope (only available in black at this time) with a certified breaking strength of 18,500lbs. Included on the winch rope is a newly designed drum attachment that reduces abrasion on the winchline under load.
The Hawse Fairlead is made in the USA by TRE (Tactical Recovery Equipment) and was designed to work with the Safety Thimble and winch rope to minimize any abrasion. The fairlead comes in either anodized black or anodized bright dip (clear) to keep your fairlead looking it’s best.
TRE ( Tactical Recovery Equipment ) is proud to introduce their latest product to their line-up of recovery and related items. The Hawse Fairlead License Plate Bracket now allows Jeeps and other off road vehicles to remain compliant in states that require the use of a front license plate. Most Jeep aftermarket front bumpers with winches are not designed for the use of front license plates to be mounted. TRE fixes this issue with the “first of it’s kind” 2 piece License Plate Bracket that adds a bracket directly behind your hawse fairlead that attaches to the front part of the license plate mount. This allows your license plate to be directly in front of your hawse fairlead. It also allows for a quick removal of your license plate when going off road or you need to use your winch. The Hawse Fairlead License Plate Bracket is made of 6061 Aluminum and is securely mounted with the use of high quality hardware. The hardware even allows for the use of locking bolts to prevent theft. Each bracket is anodized black using a 2 step Electrolytic process to help prevent fading.
Designed for use with the TRE Safety Fairlead 5 and the Safety Fairlead 4, the License Plate Bracket will not work when using the “original” winch Safety Thimble installed against the front side of the fairlead. The Safety Thimble must remain in the upright position on the fairlead.
Installation and Removal of the Hawse Fairlead License Plate Bracket
Designed to be easy to install, the back mounting plate has been designed in such a way that you do not have to remove your winch rope and Safety Thimble (or hook) during the installation process. The entire installation can be done with basic tools in about 15 minutes.
Once initial installation is complete, removing the License Plate for going off road or when you need to use your winch is quick and easy. You simply pull the 2 pins, unlatch the side brackets and your done. Putting your license plate back on is just as easy when your done on the trail and heading home.
TRE (Tactical Recovery Equipment) has designed fairleads to go along with their products, specifically the Safety Thimble 2 and the Safety Thimble 3. TRE currently offers several different designs of Aluminum Hawse fairleads so that you can choose the one that fits your needs depending on the equipment that you currently have installed.
The Safety Thimble Fairlead is designed for use with the Safety Thimble 2. It allows the Safety Thimble 2 to be placed in an upright position on the fairlead. By having the Safety Thimble in an upright position, this keeps the Safety Thimble from being the front-most part of your jeep or off road vehicle. This is especially good for rock crawlers. Now you do not have to worry about hitting your Safety Thimble on a rock or ledge that you are about to climb.
TRE Hawse Fairlead Features:
Precision machined from 6061 Aluminum.
Anodized using a 2 step Electrolytic process during anodizing to help resist fading. Currently they are only anodized in Black, since black is the only color found to resist fading the most.
The curvature of the fairlead openings are designed to cause the least resistance to abrasion to your synthetic winch rope, even while under load.
Includes all Stainless Steel hardware needed for installation
Made in the USA
The fairlead replaces standard Hawse Fairleads and roller fairleads and fits all standard winch mounts.
The TRE Aluminum Hawse Fairleads are designed to help protect your Safety Thimble as well as your synthetic winch rope.
*Designed for use with ONLY the Original Safety Thimble 2
* For use with synthetic winch rope only (Steel cable will damage fairleads)
The TRE Safety Thimble Fairlead 5 allows you to place your Safety Thimble in an upright position at the top of the fairlead when not in use. This keeps the Safety Thimble from being the front-most part of your jeep or off road vehicle. This is especially good for rock crawlers. Now you do not have to worry about hitting your Safety Thimble on a rock or ledge that you are about to climb. These are available in anodized Black or Bright Dip (clear).
The TRE Safety Fairlead 4 is the same as the Safety Fairlead 5 but is 1″ shorter for vehicles that have a light bar mounted over their fairlead mount. Some of these light mounts get in the way of using the Fairlead 5.
The “Original” Safety Thimble is designed to prevent the thimble from getting pulled into the fairlead where most accidents happen in winching, often due to winch “run-on” from electric winches. The Thimble is designed with several features to reduce the risks during the inherently dangerous activity of self-recovery with a winch. Unlike hooks and standard steel thimbles, the flat base lands flat on the face of the fairlead to prevent pulling through the fairlead and also prevents damage to rollers and the smooth radii of Hawse Fairleads It is designed to work with synthetic winch rope. The Safety Thimble forces the user to use safer connections than a shackle can afford when performing recovery operations. The Winch Safety Thimble is designed to allow the least number of connections due to the fact that an anchor shackle will fit the thimble either by the pin or the body of the shackle.
Features of the Safety Thimble
The Safety Thimble is precision machined CNC 6061 Aluminum Heavy Duty Thimble.
Anodized black with an Electrolytic Two Step Process to help resist fading.
The diameter and shape of the eye on the Safety Thimble is designed to adhere to minimum radius requirements to achieve rated breaking strength of the synthetic lines.
The design of the eye has a deep groove that allows protection against abrasion on synthetic winchline.
The Flat Base design fits securely against the fairlead and will not damage the fairlead. This is important because a scratched fairlead causes abrasion on synthetic ropes that can cause them to break.
Made in the USA! The Safety Thimble is 100% designed, manufactured, packaged and shipped in the USA.
Safety Thimble Sizes
The winch Safety Thimble comes in 3 different sizes depending on the size of the synthetic winch rope or application you are using:
Safety Thimble 1 : This is a smaller version for 3/16″ to 1/4″ synthetic ropes. These are perfect for ATV and side by sides that use the smaller winches. They are designed to be used with a 1/2″ shackle.
Safety Thimble 2 : This is the most commonly used Safety Thimble. It is designed for 5/16 to 3/8 synthetic ropes used on most Jeeps and off road vehicle winches. Designed for use with a 3/4″ anchor shackle.
Safety Thimble 3 : This is the same size as the Safety Thimble 2, but allows for the use of 1/2″ Synthetic Winch rope. Designed for use with a 3/4″ anchor shackle.
NOTE: Safety Thimbles are designed to be used with shackles for rigging. Hooks can not be used.