Customer Support: 1-702-518-0909

Currie Antirock Sway Bar Kits

CE-9900 Currie ANTIROCK Front Sway Bar
 The Currie Antirock replaces your factory sway bar. The Currie Antirock Sway Bar allows you the suspension travel needed when going off road and the stability when driving on the street all without having to disconnect and connect your stock sway bar. The Currie Antirock  sway bar kit provide balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. Currie Antirock Sway Bar Kits are available for both the front and rear on your Jeep. For maximum performance of the Currie Antirock Sway Bar Kits, while not required, it is recommended that you replace both front and rear sway bars. Antirock Kits are available in many different configurations depending on your personal preference, but performance is the same from each kit.

4LowParts.com is an Authorized Dealer of Currie Enterprises and carries all of the Currie Antirock Sway Bar Kits in stock. Here is some information on each of the Front Currie Antirock Sway Bar Kits available for your Jeep.

 

Currie Antirock Kits for Jeep Wrangler JK, TJ and Cherokee XJ

For all models of the Jeep JK, TJ, and XJ 2 or 4 door the Currie Antirock sway bar kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

 

Currie Antirock Sway Bar Kits With Steel Brackets for Jeep JK and JKU CE-9900JKF

This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

Currie ANTIROCK Front Sway Bar Kit CE-9900JKF
$484.00$509.95

$484.00$509.95 Add to cart

Sale

Currie ANTIROCK Front Sway Bar Kit Steel Brackets – Jeep JK/JKU | CE-9900JKF

$484.00$509.95

Currie ANTIROCK Front Sway Bar Kit Steel Brackets – Jeep JK/JKU | CE-9900JKF for all models of the ’07 and up Jeep JK Wranglers – 2 or 4 door. The Currie Antirock sway bar kit provides balanced performance of front and rear suspension for rugged off-road conditions.

$484.00$509.95 Add to cart

CE-9900JKF kit includes all components for installation including:

  • the sway bar,
  • semi-gloss black powder coated bolt-on steel frame brackets,
  • delron bushings,
  • semi-gloss black powder coated arms,
  • adjustable length heim jointed sway bar links,
  • necessary hardware,
  • and step-by-step instructions.
  • Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicle’s axle housing.

 

Currie ANTIROCK Front Sway Bar Kit
$522.00$549.95

$522.00$549.95 Add to cart

Sale

Currie ANTIROCK Front Sway Bar Kit w/Billet Brackets- Jeep JK | CE-9900JKFA

$522.00$549.95

The Currie Antirock sway bar kit (CE-9900JKFA) provides balanced performance of front and rear suspension for rugged off-road conditions. For all models of the Jeep JK and JKU Wranglers – 2 or 4 door.

$522.00$549.95 Add to cart

Currie Front Antirock Sway Bar Kit with Billet Aluminum Frame Brackets CE-9900JKFA 

This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

CE-9900JKFA kit includes all components for installation including:

  • the sway bar,
  • bolt-on billet aluminum frame brackets which feature the “RJ”  logo milled into the sides of them and semi-gloss black powder coat finish,
  • delron bushings,
  • semi-gloss black powder coated arms,
  • adjustable length heim jointed sway bar links,
  • necessary hardware,
  • step-by-step instructions.

 

Currie Antirock Front Sway Bar Kit - Jeep JK | CE-9900JKFSA
$551.00$579.95

$551.00$579.95 Add to cart

Sale

Currie Antirock Front Sway Bar Kit – Jeep JK | CE-9900JKFSA

$551.00$579.95

The Currie Antirock Front Sway Bar Kit for Jeep JK provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. CE-9900JKFSA

$551.00$579.95 Add to cart

Currie Front Antirock Sway Bar Kit with Steel Brackets and Aluminum Arms CE-9900JKFSA

This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

CE-9900JKFSA kit includes all components for installation including:

  • sway bar,
  • semi-gloss black powder coated bolt-on steel frame brackets,
  • delron bushings,
  • billet aluminum arms that are bent to spec.,
  • adjustable length heim jointed sway bar links,
  • necessary hardware,
  • step-by-step instructions.

 

Currie Antirock Front Sway Bar Kit - Aluminum Arms - JK | CE-9900JKFAA
$598.00$629.95

$598.00$629.95 Add to cart

Sale

Currie Antirock Front Sway Bar Kit – Aluminum Arms – Jeep JK | CE-9900JKFAA

$598.00$629.95

The Currie Antirock front sway bar kit for Jeep JK with Aluminum Arms and Brackets provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires.

Free Shipping

$598.00$629.95 Add to cart

Currie Front Antirock Sway Bar Kit w/ Aluminum Frame Brackets and Arms CE-9900JKFAA

This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

CE-9900JKFAA kit includes all components for installation including:

  • sway bar,
  • bolt-on billet aluminum frame brackets which feature the RockJock logo milled into the sides of them and semi-gloss black powder coat finish,
  • delron bushings,
  • billet aluminum arms that are bent to spec.,
  • adjustable length heim jointed sway bar links,
  • necessary hardware,
  • step-by-step instructions.

 

Antirock Front Sway Bar Kit CE-9900 Jeep TJ and LJ 

The Currie Antirock sway bar kit (CE-9900) provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars.

 

Currie Antirock Front Sway Bar Kit | CE-9900
$413.00$434.95

$413.00$434.95 Add to cart

Sale

Currie Antirock Front Sway Bar Kit – Jeep TJ | CE-9900

$413.00$434.95

The Currie Antirock front sway bar kit (CE-9900) for Jeep TJ provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. T

$413.00$434.95 Add to cart

CE-9900 kit includes all components for installation including:

  •  bushings,
  • hardware, and
  • step-by-step instructions.

*The Currie Antirock Sway Bar does not need to be disconnected for off-road use.

CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup.

 

Antirock Front Sway Bar Kit with Aluminum Arms CE-9900A for Jeep TJ and LJ

The Currie Antirock Sway Bar Kit with aluminum arm option provides balanced performance of front and rear suspension for rugged off-road conditions as well as a light weight, trick looking aluminum arms. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock Off Road Sway Bar is designed to directly replace the stock Jeep sway bar and is an easy bolt on installation. The sway bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition sway bars. The Currie Antirock Sway Bar does not need to be disconnected for off-road use.

For 1997-2006 Jeep TJ’s and Unlimited’s.

CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup.

 

Currie Antirock Rear Sway Bar Kit w/Aluminum Arms
$494.00$519.95

$494.00$519.95 Add to cart

Sale

Currie Antirock Rear Sway Bar Kit – Jeep TJ | CE-9900TJR

$494.00$519.95

Currie Antirock Rear Sway Bar Kit is the complete Jeep TJ bolt on rear Antirock sway bar kit. Kit is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing.

$494.00$519.95 Add to cart

Antirock Rear Sway Bar Kit CCE-9900TJR for Jeep TJ and LJ

This is the complete Jeep TJ/LJ bolt on rear Antirock sway bar kit. Kit is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing.

CE-9900TJR kit includes all components for installation including:

  • 45″ sway bar,
  • semi-gloss black powder coated bolt on frame brackets,
  • sway bar bushings,
  • adjustable heim jointed sway bar links,
  • weld on housing tabs,
  • and all necessary hardware with detailed instructions included.

*Requires the minor welding of the housing tabs, and trimming of the rear inner wheel wells for sway bar arm travel.

 

Currie Antirock Rear Sway Bar Kit w/Aluminum Arms
$562.00$591.95

$562.00$591.95 Add to cart

Sale

Currie Antirock Rear Sway Bar Kit w/Aluminum Arms – Jeep TJ | CE-9900TJRA

$562.00$591.95

Currie Antirock Rear Sway Bar Kit w/Aluminum Arms for  Jeep TJ is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing. | CE-9900TJRA

$562.00$591.95 Add to cart

Antirock Rear Sway Bar Kit with Aluminum Arms CE-9900TJRA for Jeep TJ and LJ

This is the complete Jeep TJ/LJ bolt on rear Antirock sway bar kit with aluminum arms. Kit is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing.

CE-9900TJRA kit includes all components for installation including:

  • 45″ sway bar,
  • semi-gloss black powder coated bolt on frame brackets,
  • sway bar bushings,
  • adjustable heim jointed sway bar links,
  • weld on housing tabs,
  • and all necessary hardware with detailed instructions included.

*Requires the minor welding of the housing tabs, and trimming of the rear inner wheel wells for sway bar arm travel.

 

Currie Antirock Front Sway Bar Kit - Jeep XJ | CE-9900XJF
$540.00$567.95

$540.00$567.95 Add to cart

Sale

Currie Antirock Front Sway Bar Kit – Jeep XJ | CE-9900XJF

$540.00$567.95

The Currie Antirock front sway bar kit (CE-9900XJF ) for Jeep XJ provides balanced performance of front and rear suspension for rugged off-road conditions.

$540.00$567.95 Add to cart

AntiRock Front Sway Bar Kit for Jeep XJ CE-9900XJF 

This is the bolt on front Antirock front sway bar kit for the ’87-’01 Jeep XJ Cherokee and ’86-’92 Jeep Comanche pick ups.

CE-9900XJF Kit Includes all of the Following:

  • semi-gloss black powder coated billet aluminum brackets,
  • splined torsion style sway bar arms,
  • adjustable length heim jointed links,
  • all mounting hardware

 

Currie Enterprises Universal Antirock Sway bar Kit

Currie now offers Universal Antirock Sway Bar Kit in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 36″ torsion bar length and 17″ long steel arms.

 

Universal Antirock Sway Bar Kit | Currie CE-9901-17
$470.00$494.95

$470.00$494.95 Read more

Sale

Universal Antirock Sway Bar Kit 36″ Bar & 17″ Arms Currie CE-9901-17

$470.00$494.95

Currie now offers Universal Antirock Sway Bar Kit in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 36″ torsion bar length and 17″ long steel arms.

$470.00$494.95 Read more

Universal Antirock Swaybar Kit CE-9901-17 

Universal Antirock Sway Bar Kit

Currie now offers Antirock sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 36″ torsion bar length and 17″ long steel arms. Vertical links use a 14″ long 1/2″ x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2″ x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75″ x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 36″ bar is a .750″ diameter. These kits require fabricating for installation.

*These are NOT bolt-on kits.