Heavy Duty Adjustable Front Trac Bar Currie (CE-9120TJJ) for Jeep TJ/XJ/LJ/MJ
The all new and improved Heavy Duty Adjustable Front Trac Bar for the Jeep TJ/XJ/LJ/MJ features an offset Johnny Joint rod end that puts the bar further forward providing more clearance between the differential and the trac bar. Other features include 1 1/4″ x .250 wall 4130 chrome moly construction, a welded in gusset from the bar to the Johnny Joint, heavy duty adjustor end with urethane bushing and steel insert sleeve, and semi-gloss black powder coat finish.
Some drilling is required for installation. The supplied frame bolt is a 5/8″, and the supplied housing bolt is 1/2″. Both of these holes must be drilled to size to accommodate the heavier duty hardware. A heavy duty nut plate kit is supplied for the housing end.
NOTE: This trac bar is intended to be used with a minimum of 2″ of lift. It may work on vehicles with less lift with Dana 30 frontends, however, on vehicles with no lift and a Dana 44, 9″ or 60 front end, you may run into a clearance issue. Always check fitment before drilling!
Part #: CE-9120TJJ
Mfg: Currie Enterprises
|Dimensions||36 x 4 x 5 in|