Customer Support: 1-702-518-0909
Dana 44 JK Ring & Pinion - Rear | Jeep JK | Revolution Gear & Axle
R&P Dana 30 Jeep JKRevolution

Dana 44 JK Ring & Pinion – Rear | Jeep JK | Revolution Gear & Axle

$172.00

In stock

Dana 44 JK Ring & Pinion – Rear fits 07+ Jeep JK, JKU and Rubicon Models. Revolution Gear & Axle Premium Ring & Pinion sets are made from the highest quality 8620 material. Comes with an industry leading FREE 2-year warranty against manufacturer defects.

 

Clear selection

Dana 44 JK – Rear Install & Bearing Kits

Dana 44 JK Ring & Pinion – Rear for Jeep JK and JKU

Revolution Gear & Axle’s Premium Dana 44 JK Ring & Pinion sets are made from the highest quality 8620 material. They are double lapped for easy setup & years of quiet, cool, trouble free operation.

Revolution Ring and Pinions come with an industry leading FREE 2 year warranty against manufacture defects.

Fits: 07+ Jeep JK, JKU and Rubicon Models

Gear Ratios: 4.11 | 4.56 | 4.88 | 5.13 | 5.38

Dana 44 JK Ring & Pinion

When you need a quality gear set – look no further than Revolution Gear & Axle’s Dana 44 JK Ring & Pinion. Revolution offers a full line of Premium, Top Quality Ring and Pinion gear sets in all the popular ratios to accommodate most light trucks, Jeeps and rear-wheel drive passenger cars. Revolution ring and pinion sets are constructed to last longer, run quieter and setup easier than other aftermarket gears. We do this by concentrating on every detail in the manufacturing processes of our gears. From design, to final inspection Revolution’s attention to detail and precision guarantees that you’re getting the highest quality gear set available.

Often times you need more pulling power out of your tow rig and the factory ratios are not low enough to give you the power you need. Other times you find that when you upgraded your under sized stock tires to something a little bigger and with more style you find that your speedometer is off and the power band seems to have slipped – it’s time to re-gear and reclaim your power. Revolution offers a full line of ratios for your 2 and 4 wheel drive trucks and SUVs. Revolution also offers a large number of ratios for your racing needs as well. Our performance gears are designed to handle higher horsepower and heavy loads. Whether you are correcting for larger tires, racing or just looking for more power, Revolution has the gear for you!

Mfg: Revolution Gear & Axle

 

Weight 10 lbs
Dimensions 12 x 12 x 6 in
Choose Ratio

4.10, 4.56, 4.88, 5.13, 5.38

Axle

Dana 44

Manufacturer

Revolution Gear and Axle

Add-Ons

Dana 44 JK Rubicon Ring & Pinion – Front – Jeep JK | Revolution Gear & Axle

$174.00

Dana 44 JK Rubicon Ring & Pinion Gear Set by Revolution Gear & Axle are made from the highest quality 8620 material. They are double lapped for easy setup & years of quiet, cool, trouble free operation. Fits only Jeep JK and JKU Rubicon model Front Dana 44 Axles

Dana 44 JK Rear Axle Kit
$549.00

Dana 44 JK Rear Axle Kit – 30 Spline – USA Made 4340 Chromoly | Revolution Gear & Axle

$549.00

Dana 44 Rear Axle Kit for Jeep JK (RAK50) are 4340 Chromoly 30 Spline and MADE IN USA!! These shafts come with Lifetime warranty against shaft failure..PLUS!! These axle kits come 100% Pre-Assembled with bearings and retainers for a simple swap!!

 

Dana 30 JK Ring & Pinion – Jeep JK | Revolution Gear & Axle

$155.79

Dana 30 JK Ring & Pinion – Front | Jeep JK Gear sets are made from the highest quality 8620 material. Gears are double lapped for easy setup & years of quiet, cool, trouble free operation.

Dana 44 JK Rubicon Minimum Install Kit - Front | Ring & Pinion
$69.45$113.99

$69.45$113.99 Add to cart

Sale

Dana 44 JK Rubicon Minimum Install Kit – Front | Ring & Pinion

$69.45$113.99

Dana 44 JK Rubicon Minimum Install Kit – Front comes with the basic pieces need to install a new ring & pinion sets by Revolution Gear & Axle. Fits Dana 44 Jeep JK Rubicon Front Axle only.

$69.45$113.99 Add to cart